Winchester rifle is a comprehensive term describing a series of lever action manufactured by the Winchester Repeating Arms Company. Developed from the 1860 Henry rifle, Winchester rifles were among the earliest repeaters. The Model 1873 was particularly successful, being marketed by the manufacturer as "The Gun That Won the West".
Horace Smith and Daniel Wesson of Norwich, Connecticut, acquired the Jennings patent from Robbins & Lawrence, as well as shop foreman Benjamin Tyler Henry. Smith made several improvements to the Jennings design, and in 1855 Smith and Wesson together with several investors formed a corporation, the Volcanic Repeating Arms Company, to manufacture Smith's modification of the Hunt-Jennings, the Volcanic lever-action pistol and rifle. Its largest stockholder was Oliver Winchester.
For the Volcanic rifle, Smith added a primer charge to Hunt's "Rocket Ball" and thus created one of the first fixed metallic cartridges which incorporated bullet, primer and powder in one self-contained unit. While still with the company, Smith went a step further and added a cylindrical copper case to hold the bullet and powder with the primer in the case rim, thus creating one of the most significant inventions in firearms history: the metallic rimfire cartridge.Smith's cartridge was derived largely from the Flobert BB Cap, but the Flobert design contained no powder. The cylindrical case was in all likelihood inspired by another French design, the Lefaucheux pinfire cartridge. Smith's cartridge, the .22 Short, would be introduced commercially in 1857 with the landmark Smith & Wesson Model 1 revolver and is still manufactured today.
The Volcanic rifle had only limited success, which was partially attributable to the design and poor performance of the Hunt-derived Volcanic cartridge, a hollow conical ball filled with black powder and sealed by a cork primer. Although the Volcanic's repeater design far outpaced the rival technology, the unsatisfactory power and reliability of the .25 and .32 caliber "Rocket Balls" were little match for the competitors' larger calibers. Wesson had left Volcanic soon after it was formed and Smith followed eight months later, to create the Smith & Wesson Revolver Company. Volcanic moved to New Haven in 1856, but by the end of that year became insolvent. Oliver Winchester purchased the bankrupt firm's assets from the remaining stockholders and reorganized it as the New Haven Arms Company in April 1857.
Benjamin Henry continued to work with Smith's cartridge concept and perfected the much larger, more powerful .44 Henry cartridge. Henry also supervised the redesign of the rifle to use the new ammunition, retaining only the general form of the breech mechanism and the tubular magazine. This became the Henry rifle of 1860, which was manufactured by the New Haven Arms Company, and used in considerable numbers by certain Union army units in the American Civil War. Confederates called the Henry "that damned Yankee rifle that they load on Sunday and shoot all week!"
From 1883, John Moses Browning worked in partnership with Winchester, designing a series of rifles and shotguns, most notably the lever-action Winchester Model 1886, Model 1892, Model 1894, and Model 1895 rifles, along with the lever-action Model 1887/1901 shotgun, the pump-action Model 1890 rifle, and the pump-action Model 1893/Model 1897 shotgun.
A "musket" version was also produced, Winchester Model 1866 Musket used at the Battle of Liberty Place, Old West Events primarily for military users. (Musket was a term that, at the time, denoted a full-length military-style stock, not to be confused with a true smoothbore musket).
France purchased 6,000 Model 1866 rifles along with 4.5 million .44 Henry cartridges during the Franco-Prussian War. The Ottoman Empire purchased 45,000 Model 1866 rifles and 5,000 carbines in 1870 and 1871. These rifles were used in the 1877 Russo-Turkish War, causing much surprise when outnumbered Turks at the Siege of Plevna inflicted many times more casualties than their opponents armed with single-shot Krnka and Berdan rifle rifles. The effect of the 1866 at the siege at Plevna sparked a renewed interest in the adoption of repeating rifles for several European countries.
The Swiss Army initially selected the Model 1866 to replace their existing single-shot Milbank-Amsler rifles. However, ensuing political pressure to adopt a domestic design resulted in the Vetterli Model 1867, a bolt-action design utilizing a copy of the Winchester's tubular magazine, being adopted instead.
Due to public demand, the Model 1866 continued to be manufactured and sold until 1899, mainly because they were less expensive than the later steel-framed centerfire models.
The original Model 1873 was never offered in the military revolver .45 Colt cartridge, but a number of modern reproductions are chambered for the round.
To both celebrate and enhance the Model 1873's prestige, Winchester established a coveted "One of One Thousand" grade in 1875. Barrels producing unusually small groupings during test-firing were fitted to rifles with set triggers and a special finish. Marked "One of One Thousand", they sold for a then pricey $100 (Worth about $2,612.90 as of 2024). A popular 1950 Western starring James Stewart, Winchester '73, was based on the coveted gun. Promotions included a search for "One of One Thousand" rifles by Universal Studios, with advertisements in sporting magazines and posters in sporting goods stores.
A second grade of Model 1873 barrels producing above average accuracy were fitted to rifles marked "One of One Hundred", and sold for $20 over list. Approximately 136 "One of One Thousand" Model 1873s were sold, and only eight "One of One Hundred" rifles.
In all, over 720,000 Model 1873s were produced up until 1923. With a return to popularity due to present-day Cowboy action shooting, '73 rifles and carbines of a high quality have been made in Italy by Uberti, encouraging a return to production under license from the Olin Corporation company in 2013, joining the Model 1892 and the Model 1894 being manufactured in Japan by the Miroku Corporation for FN/Browning. Nearly faithful in design to the original, including the trigger disconnect safety, sliding dustcover, and a crescent-shaped buttplate, it incorporates two safety improvements: a firing pin block preventing it from moving forward unless the trigger is pulled, and a cartridge carrier modification to eject used casings away from the shooter.
In 2014, a weathered Model 1873 was found leaning against a tree in Great Basin National Park. It became known as the Forgotten Winchester and sparked media interest because of the mystery about who left it there and why they never came back for it.
Introduced to celebrate the American Centennial Exposition, the Model 1876 earned a reputation as a durable and powerful hunting rifle. Four versions were produced: a barrel Carbine, a barrel Express Rifle with a half-length magazine, a barrel Sporting Rifle, and a barrel Musket. Standard rifles had a blued finish while deluxe models were Case hardening. Collectors identify a first model with no dust cover, a second model with a dust cover rail fastened by a screw, and a third model with an integral dust cover. Total production was 63,871 including 54 One of One Thousand Model 1876s and only seven of the One of One Hundred grade.
Originally chambered for the new .45-75 Winchester Centennial cartridge (designed to replicate the .45-70 ballistics in a shorter case), the Model 1876 also had versions in .40-60 Winchester, .45-60 Winchester and .50-95 Express; the '76 in the latter chambering is the only repeater known to have been in widespread use by professional buffalo hunters. The Canadian North-West Mounted Police used the '76 in .45-75 as a standard long arm for many years with 750 rifles purchased for the force in 1883; the Mountie-model '76 carbine was also issued to the Texas Rangers. Theodore Roosevelt used an engraved, pistol-gripped half-magazine '76 during his early hunting expeditions in the West and praised it. A '76 was also found in the possession of Apache warrior Geronimo after his surrender in 1886.
The Model 1876 toggle-link action receiver was too short to handle popular big-game cartridges, including the .45-70, and production ceased in 1897, as big-game hunters preferred the Model 1886 action chambered for longer and more powerful cartridges.
A total of 1,004,675 Model 1892 rifles were made by Winchester, and it was exported internationally, becoming very popular in South America and Australasia. Although Winchester stopped manufacture in 1941, today versions are still being made by the Brazilian arms maker Amadeo Rossi, and by Chiappa Firearms, an Italian maker. In its modern form, using updated materials and production techniques, the Model 1892's action is strong enough to chamber high-pressure handgun rounds, such as .357 Magnum, .44 Magnum, and .454 Casull. The Winchester '92 was often used in Hollywood Western movies and TV shows out of its correct period, achieving some fame as a 'cowboy' lever action, although it was historically too late for that.
The 9422 action design was original and extremely reliable. The feed system handled the cartridge from the magazine to the breech face by its rim, and the slide cammed the rear of the breechblock up into the locking recess. A concealed polymer buffer above the breech gave a firm-feeling lockup and a very positive unlocking motion.
The 9422 had worldwide appeal to customers raised on Westerns and to parents looking for a way to introduce their children to shooting. Over the course of production, a higher-finished model called the 9422 XTR, a .17 rimfire model, and several commemorative models were offered. Production ended in 2005.
Model 1876
Model 1886
Model 1892
Model 1894
Model 1895
Model 88
Model 9422
New production
See also
Footnotes
Citations
Bibliography
External links
|
|